(image for) Brake Kit; 6" Shepherd Institutional No-Matic Series; (Pedal/ lever; arm and axle) (Item #89224)


Images shown are representations only. Refer to product descriptions for exact specifications. Please call if specific aspects of the appearance are required.

Brake Kit; 6" Shepherd Institutional No-Matic Series; (Pedal/ lever; arm and axle) (Item #89224)

As Low As $3.16

  • Shipping Weight: 0.26 lbs
Volume Pricing - Call for higher quantities
4-11
$3.97
12-23
$3.61
24-39
$3.47
40-71
$3.34
72+
$3.16
Min:  4
Qty :

Estimated shipping costs are available upon adding to cart.
Description

Brake Kit; 6" Shepherd Institutional No-Matic Series; (Pedal/ lever; arm and axle) (Shepherd 009144; 009145; 009182)

Brake kits typically include three components: the brake arm, the brake pedal and the brake axle, which has a shoulder to allow the brake pedal to work freely after tightenign the axle. Brakes kits are usually manufacturer-specific. To fit a brake kit to the caster, the producer of the caster is usually necessary to guarantee compatibility.

To install, remove the axle bolt and wheel from the caster. The axle-bolt will not be reused. Install the brake arm by mounting it to the side of the caster. On most models, a tab on the brake arm will fit into a hole in the caster arm. On other models, the upper part of the brake arm will be inserted into and partially through the hole in the caster arm.



You can adjust the brake clearance and braking force by bending the upper part of the brake so that it makes stronger or weaker contact to match your preference.



Insert the NEW included brake-axle-bolt through the brake pedal, then through the axle hole of the brake arm, then through the yoke, and through the caster wheel. Tighten the axle nut on the axle. Do not over-tighten as it may make the brake impossible to operate (on some models). Tighten to your preference.

Cast iron, forged steel and ductile steel wheels offer the ultimate in load capacity and impact strength. The wheels feature heavy cross section castings for heavy duty use, abrasion resistance and a long service life. They are resistant to abrasions and require minimal effort to start-up and push loads. Built for high capacity applications, the cast iron wheels can withstand extreme heat. These are avialable in a wide variety of sizes, weight capacities, and bearing types.

Specs

  • For Wheel Diameter: 6"
  • For Wheel Width: 1-1/4"
  • Material: Steel (Ductile)
  • Wheel Locks: Tread brake
  • Shipping Weight: 0.26 lbs.
  • Usually Ships in: 24 hours (may be affected by quantity ordered)

  • Related Items
    Also purchased
    Reviews (0)
    Warranty/Returns

    Products are warranted for basic operations and performance.  Products are guaranteed to match the product description for fit, form and function. (Color or slight tooling differences are subjective and may not be covered by warranty. Obvious color errors - such as you requested blue tread and received red - will be fully addressed.) Inherent quality issues become obvious immediately upon placing the products into service. Failures resulting after weeks or months of service likely result from  environmental or usage factors. When in doubt, please contact us to discuss options. Our goal is to help address your needs and encourage your long term trust. Purchased the wrong item? No worries. Returns are usually allowed if the wrong item was purchased. Just contact Apollo Caster within 10 days of receiving your order for an RMA and the simple return instructions. Buyer pays return shipping and a small restock fee.

      (image for) Hours and Holidays Shipped same day


      Quick Email!

      Have questions about our products? Wondering what caster would best suit your needs? Just saying hi? Drop us a line here!

      This value is required.
      This value is required.
      This value must be a valid Email Address.
      This value is required.
      Cart