(image for) Ball Transfer; 1"; Nylon Ball; Flange; Round (2-7/8" diameter: two holes: 2-3/16" apart); Carbon Steel housing; 75#; Load height: 5/8"; Recessed depth 5/8" (Item #88173)(image for) Ball Transfer; 1"; Nylon Ball; Flange; Round (2-7/8" diameter: two holes: 2-3/16" apart); Carbon Steel housing; 75#; Load height: 5/8"; Recessed depth 5/8" (Item #88173)(image for) Ball Transfer; 1"; Nylon Ball; Flange; Round (2-7/8" diameter: two holes: 2-3/16" apart); Carbon Steel housing; 75#; Load height: 5/8"; Recessed depth 5/8" (Item #88173)


Images shown are representations only. Refer to product descriptions for exact specifications. Please call if specific aspects of the appearance are required.

Ball Transfer; 1"; Nylon Ball; Flange; Round (2-7/8" diameter: two holes: 2-3/16" apart); Carbon Steel housing; 75#; Load height: 5/8"; Recessed depth 5/8" (Item #88173)

As Low As $12.73

  • Shipping Weight: 0.24 lbs
Volume Pricing - Call for higher quantities
1-7
$13.87
8-11
$13.15
12-23
$12.95
24+
$12.73
Qty :

Estimated shipping costs are available upon adding to cart.
Description

Ball Transfer; 1"; Nylon Ball; Flange; Round (2-7/8" diameter: two holes: 2-3/16" apart); Carbon Steel housing; 75#; Load height: 5/8"; Recessed depth 5/8"

Ball Transfers provide omnidirectional motion with extreme ease of movement. Designed for traditional ball up position for ball transfer tables and often used as a caster in the ball down orientation for rolling applications such as retail store displays. Main balls can be made of nylon, steel or stainless and the housings can be either steel or stainless. A variety of connectors are available and a few thumb-screw brakes are offered.

Unlike many casters, ball transfers are impervious to cold. They do not freeze up.

Ball Transfers can be noisy. The multitude of supporting ball bearings tend to chatter as they move - regardless of the main ball being steel or nylon.

Ball Transfers are designed for smooth substrate and weight capacity may be dimished in the ball-down configuration.

Plastic wheels are lightweight, economical, with a hard tread that withstands impacts and abusive conditions. They provide floor protection, are non-marking and non-conductive. Resistant to water, oils, grease, solvents and many chemicals.

Specs

  • Size: 1"
  • Material: Nylon
  • Load Rating (Per Item): 75 pounds
  • Finish: Carbon Steel
  • Click for Connector Details: Flange; Round (2-7/8" diameter: two holes: 2-3/16" apart)
  • Misc Options: Weep Hole(s)
  • Load Height: 5/8"
  • Shipping Weight: 0.24 lbs.
  • Usually Ships in: 3-5 days (may be affected by quantity ordered)

  • Related Items
    Also purchased
    Reviews (0)
    Warranty/Returns

    Products are warranted for basic operations and performance.  Products are guaranteed to match the product description for fit, form and function. (Color or slight tooling differences are subjective and may not be covered by warranty. Obvious color errors - such as you requested blue tread and received red - will be fully addressed.) Inherent quality issues become obvious immediately upon placing the products into service. Failures resulting after weeks or months of service likely result from  environmental or usage factors. When in doubt, please contact us to discuss options. Our goal is to help address your needs and encourage your long term trust. Purchased the wrong item? No worries. Returns are usually allowed if the wrong item was purchased. Just contact Apollo Caster within 10 days of receiving your order for an RMA and the simple return instructions. Buyer pays return shipping and a small restock fee.

      (image for) Hours and Holidays Shipped same day


      Quick Email!

      Have questions about our products? Wondering what caster would best suit your needs? Just saying hi? Drop us a line here!

      This value is required.
      This value is required.
      This value must be a valid Email Address.
      This value is required.
      Cart