Caster; Swivel; 3" x 13/16"; Hard Rubber; Threaded Stem (3/8"-16TPI x 1-1/2"); Zinc; Plain bore; 110#; Side friction brake (66659)Caster; Swivel; 3" x 13/16"; Hard Rubber; Threaded Stem (3/8"-16TPI x 1-1/2"); Zinc; Plain bore; 110#; Side friction brake (66659)


Images shown are representations only. Refer to product descriptions for exact specifications. Please call if specific aspects of the appearance are required.

Caster; Swivel; 3" x 13/16"; Hard Rubber; Threaded Stem (3/8"-16TPI x 1-1/2"); Zinc; Plain bore; 110#; Side friction brake (66659)

As low as $5.79

  • Shipping Weight: 0.6lbs
Volume Pricing - Call for higher quantities
1-7
$6.96
8-15
$6.73
16-33
$6.39
34-59
$6.10
60+
$5.79
Qty :

Estimated shipping costs are available upon adding to cart.
Description

Caster; Swivel; 3" x 13/16"; Hard Rubber; Threaded Stem (3/8"-16TPI x 1-1/2"); Zinc; Plain bore; 110#; Side friction brake (Shepherd PRE30605ZN-3HB / 101673)

The Hard rubber wheels are one-piece molded construction, available in black or grey, and have a higher load capacity than the soft rubber and will not flatten while sitting under load. They provide an easy roller, and easy start-up along with great durability. Also resistant to most chemicals, oils, grease, solvents and cleaning agents.

The soft rubber wheels are a good choice for those applications where the average load is light with occasional loads using the full capacity of the wheel. Soft Rubber wheels are manufactured of quality materials with a resilient rubber tread bonded to the hard rubber core. These wheels are an economical choice for moving equipment. The soft rubber wheels, if overloaded, can result in flat spots making initial rollability more difficult. Do not use in oil/ grease situations, where metal chips/ filings are present, or in high temperature environments.

Be alert that these wheels may not be non-marking.

Specs

  • Wheel Diameter: 3"
  • Tread Width: 13/16"
  • Material: Rubber (Hard)
  • Load Rating (Per Item): 110 pounds
  • Finish: Zinc
  • Click for Connector Details: Threaded Stem (3/8"-16TPI x 1-1/2")
  • Bearing: Plain bore
  • Side friction brake
  • Wheel Locks: Side friction brake
  • Load Height: 3-5/8"
  • Swivel Radius: 2-3/8"
  • Shipping Weight: 0.6 lbs.
  • Usually Ships in: 24 hours (may be affected by quantity ordered)

  • •Made in USA • Industry leading selection and overall value • Fast deliveries for any order quantity • High-strength & heat treated steel for increased durability and caster life • Dual ball raceways • RoHS compliant zinc plating for corrosion resistance • Octagon washer on stem models for easy installation • NSF approved (less thread guards) Applications: • Store fixtures • Carts • Institutional Equipment • Food Service Equipment • Furniture • Janitorial Equipment • Office Equipment • Racks and Storage Equipment • Medical Equipment • RoHS Compliant• NSF Listed

    Related Items
    Accessories
    Also purchased
    Reviews (0)
    Warranty/Returns

    Products are warranted for basic operations and performance.  Products are guaranteed to match the product description for fit, form and function.  (Color or slight tooling differences are subjective and may not be covered by warranty. Obvious color errors - such as you requested blue tread and received red - will be fully addressed.)  Inherent quality issues become obvious immediately upon placing the products into service.  Failures resulting after weeks or months of service likely result from  environmental or usage factors.   When in doubt, please contact us to discuss options. Our goal is to help address your needs and encourage your long term trust.
     
    Purchased the wrong item?  No worries.  Returns are usually allowed if the wrong item was purchased.  Just contact Apollo Caster within 10 days of receiving your order for an RMA and the simple return instructions.  Buyer pays return shipping and a small restock fee.  

    Hours and Holidays Shipped same day
    Cart