(image for) Roller Wheel; 2-1/4" x 2-3/4"; Rubber (Hard); Precision Ball Brng; 1/2" Bore; 3" Hub Length; 100#. Comes with welded-on metal Bracket. (Item #88958)


Images shown are representations only. Refer to product descriptions for exact specifications. Please call if specific aspects of the appearance are required.

Roller Wheel; 2-1/4" x 2-3/4"; Rubber (Hard); Precision Ball Brng; 1/2" Bore; 3" Hub Length; 100#. Comes with welded-on metal Bracket. (Item #88958)

As Low As $9.49

  • Shipping Weight: 0.8 lbs
Information:
This product has sealed bearings. You need not grease these wheels even if the wheel hub and/or the axle has a zerk fitting.

Volume Pricing - Call for higher quantities
4-7
$10.43
8-15
$9.84
16-29
$9.69
30+
$9.49
Min:  4
Qty :

Estimated shipping costs are available upon adding to cart.
Description

Roller Wheel; 2-1/4" x 2-3/4"; Rubber (Hard); Precision Ball Brng; 1/2" Bore; 3" Hub Length; 100#. Comes with welded-on metal Bracket. (Returns may not be allowed - ask before ordering)

When selecting a wheel, make sure to get the weight capacity needed along with the diameter, width, and axle bore. In some cases, the hub length is critical to a good fit. As with casters, the larger the wheel, the easier the push will be. Pay attention to hard vs soft wheels, propensity to flatten and marking vs non-marking.

Remember that larger diameter equates to ease-of-roll while wider width equates to higher weight capacity.

The Hard rubber wheels are one-piece molded construction, available in black or grey, and have a higher load capacity than the soft rubber and will not flatten while sitting under load. They provide an easy roller, and easy start-up along with great durability. Also resistant to most chemicals, oils, grease, solvents and cleaning agents.

The soft rubber wheels are a good choice for those applications where the average load is light with occasional loads using the full capacity of the wheel. Soft Rubber wheels are manufactured of quality materials with a resilient rubber tread bonded to the hard rubber core. These wheels are an economical choice for moving equipment. The soft rubber wheels, if overloaded, can result in flat spots making initial rollability more difficult. Do not use in oil/ grease situations, where metal chips/ filings are present, or in high temperature environments.

Be alert that these wheels may not be non-marking.

Specs

  • Wheel Diameter: 2-1/4"
  • Tread Width: 2-3/4"
  • Material: Rubber (Hard)
  • Load Rating (Per Item): 100 pounds
  • Bearing: Prec Ball Brngs
  • Bore: 1/2"
  • Hub Length: 3"
  • Shipping Weight: 0.8 lbs.
  • Usually Ships in: 4-6 Days (may be affected by quantity ordered)

  • Also purchased
    Reviews (0)
    Warranty/Returns

    Products are warranted for basic operations and performance.  Products are guaranteed to match the product description for fit, form and function. (Color or slight tooling differences are subjective and may not be covered by warranty. Obvious color errors - such as you requested blue tread and received red - will be fully addressed.) Inherent quality issues become obvious immediately upon placing the products into service. Failures resulting after weeks or months of service likely result from  environmental or usage factors. When in doubt, please contact us to discuss options. Our goal is to help address your needs and encourage your long term trust. Purchased the wrong item? No worries. Returns are usually allowed if the wrong item was purchased. Just contact Apollo Caster within 10 days of receiving your order for an RMA and the simple return instructions. Buyer pays return shipping and a small restock fee.

      (image for) Hours and Holidays Shipped same day


      Quick Email!

      Have questions about our products? Wondering what caster would best suit your needs? Just saying hi? Drop us a line here!

      This value is required.
      This value is required.
      This value must be a valid Email Address.
      This value is required.
      Cart