(image for) Wheel; 3-1/2" x 1-1/4"; Super Soft 45A Durometer Thermoplastized Rubber (Gray); Plain bore; 110#; 3/8" Bore; 1-1/2" Hub Length (Item #87351)


Images shown are representations only. Refer to product descriptions for exact specifications. Please call if specific aspects of the appearance are required.

Wheel; 3-1/2" x 1-1/4"; Super Soft 45A Durometer Thermoplastized Rubber (Gray); Plain bore; 110#; 3/8" Bore; 1-1/2" Hub Length (Item #87351)

As Low As $6.19

  • Shipping Weight: 0.4 lbs
Volume Pricing - Call for higher quantities
1-9
$7.51
10-19
$6.89
20-39
$6.68
40-69
$6.46
70+
$6.19
Qty :

Estimated shipping costs are available upon adding to cart.
Description

Wheel; 3-1/2" x 1-1/4"; Super Soft 45A Durometer Thermoplastized Rubber (Gray); Plain bore; 110#; 3/8" Bore; 1-1/2" Hub Length

When selecting a wheel, make sure to get the weight capacity needed along with the diameter, width, and axle bore. In some cases, the hub length is critical to a good fit. As with casters, the larger the wheel, the easier the push will be. Pay attention to hard vs soft wheels, propensity to flatten and marking vs non-marking.

Remember that larger diameter equates to ease-of-roll while wider width equates to higher weight capacity.

Thermoplastic Rubber (TPR) wheels are precision molded and mechanically locked to a durable polyolefin core to provide an economical wheel for many applications. They provide a smooth, cushioned ride and can overcome small debris and obstacles on the floor. They offer floor protection, are non-marking and non-conductive. These often have various brand names by various manufacturers and can be flat or crowned.

TPR are considered soft wheels which may experience flat-spotting even when loaded within the acceptable weight limits. Flat-spotting is more noticeable in warmer weather. The flat-spotting will roll-out and dissipate after a few minutes of rolling, depending on the size of the standing load and extent of the flat-spotting. This is a normal occurrence of these wheels and is not a product failure. If your application cannot tolerate this temporary condition, another material type may be preferable.

Specs

  • Wheel Diameter: 3-1/2"
  • Tread Width: 1-1/4"
  • Material: Thermoplastized Rubber (Gray)
  • Load Rating (Per Item): 110 pounds
  • Bearing: Plain bore
  • Bore: 3/8"
  • Hub Length: 1-1/2"
  • Shipping Weight: 0.4 lbs.
  • Usually Ships in: 7-10 business days (may be affected by quantity ordered)

  • Related Items
    Also purchased
    Reviews (0)
    Warranty/Returns

    Products are warranted for basic operations and performance.  Products are guaranteed to match the product description for fit, form and function. (Color or slight tooling differences are subjective and may not be covered by warranty. Obvious color errors - such as you requested blue tread and received red - will be fully addressed.) Inherent quality issues become obvious immediately upon placing the products into service. Failures resulting after weeks or months of service likely result from  environmental or usage factors. When in doubt, please contact us to discuss options. Our goal is to help address your needs and encourage your long term trust. Purchased the wrong item? No worries. Returns are usually allowed if the wrong item was purchased. Just contact Apollo Caster within 10 days of receiving your order for an RMA and the simple return instructions. Buyer pays return shipping and a small restock fee.

      (image for) Hours and Holidays Shipped same day


      Quick Email!

      Have questions about our products? Wondering what caster would best suit your needs? Just saying hi? Drop us a line here!

      This value is required.
      This value is required.
      This value must be a valid Email Address.
      This value is required.
      Cart